Arrange blown sealed-unit replacement in Epsom
A blown unit has lost the integrity of its edge seal, allowing moisture into the glass cavity. A made-to-measure unit is specified to suit the frame that will stay in place.
Start with a free description of the work needed at your property in Epsom. Up to four independent sealed-unit specialists may respond, depending on the job and availability. There is no obligation to accept a quote.
For a property in Epsom or elsewhere in Surrey, provide the full postcode and any access restrictions.
Problems worth showing a specialist
Tell the specialist what you have noticed rather than trying to diagnose it yourself.
- Condensation, haze or deposits within the cavity after the seal has failed.
- A previously identified failed unit that is due for replacement.
- Several units requiring a coordinated order with matching spacer and glass details.
- A compatible glass upgrade while the unit is being replaced, without changing sound frames.
Check the specification before ordering
The order should identify each pane, cavity, spacer and overall thickness. Low-E glass, argon fill and warm-edge spacers may be options within the existing system. Acoustic laminates add weight, and a thicker unit needs suitable beads and frame capacity. Loose gaskets, rattling glass or distorted reflections warrant inspection but do not alone establish edge-seal failure.
From survey to completion
- Inspect the glass and its supporting frame to identify the fault and any related drainage problem.
- Take manufacturing dimensions and agree the exact glass build-up with the supplier.
- Plan handling for the weight of the glass, protect surrounding finishes and remove the failed unit.
- Position the new unit on compatible setting and location blocks without obstructing drainage.
- Check beads, gaskets, opening and locking, clean the area and remove the old unit for disposal.
What affects the price in Epsom
The indicative UK range for blown unit replacement is £100–£900. The broad range covers small straightforward units as well as larger orders with upgrades or harder access. Ask for each unit to be itemised. The misted-glazing service describes much of the same work, not a second fee.
These figures are a budgeting guide, not a measured local average for Epsom. Confirm VAT where applicable, travel, safe access, waste removal and making good.
Help the firm prepare for a visit
Note the number of units, visible dimensions, frame material and floor level. Describe any leaded pattern, Georgian bars, tint or privacy glass that needs matching. Ask the glazier to check compatibility before approving an insulation or acoustic upgrade.
Photos and rough dimensions can start the conversation, while final dimensions belong to the measuring survey.
Permissions and the right paperwork
A sealed-unit swap with the frame retained is normally a repair rather than a full window replacement. It is not normally a FENSA-certificated installation; FENSA explains what its certificates cover. The glazier still needs to specify suitable safety glazing where the location requires it. Listed buildings and unusual work can need additional checks.
Historic glazing, protected elevations and changes to an opening may need consent before an order is placed. Ask Surrey County Council about the relevant local process. Leaseholders should also check any freeholder consent.
Questions for the handover
A replacement unit should have a written product guarantee and clear fitting terms. Report a loose bead or blocked drainage route to the installer. Avoid applying solvents or sealants to the unit edge without the manufacturer's advice.
Manufacturing lead time is separate from time on site, so ask for both. The site's guide fitting time is 2 hours–1 day, depending on scope and access.
Double Glazing Quotes is a matching service and does not carry out the work or employ the specialists. Companies joining the network are asked for relevant insurance details and references. Check current cover, relevant experience and written guarantee terms with the firm you choose.
Coverage near your property
If your property is outside the named area, give its actual postcode so the firm can check coverage.
Ashtead, Banstead, Leatherhead, Esher, Kingston upon Thames, Reigate, Dorking
The questions below explain common decisions about blown sealed-unit replacement.
Before booking blown sealed-unit replacement
How can I request blown sealed-unit replacement quotes in Epsom?
Use the free enquiry form to give your postcode and describe the affected windows or doors. Double Glazing Quotes can introduce up to four independent sealed-unit specialists covering Epsom, depending on service coverage and availability. You do not have to accept a quotation.
Is a blown unit different from misted glazing?
The terms often refer to the same problem. Blown describes the failed edge seal, while misted describes moisture visible between the panes. One enquiry can cover the fault.
Can a new unit be thicker than the original?
Only if the frame system, beads, gaskets and supporting hardware can accommodate it. The glazier must confirm compatibility before a different thickness or heavier glass is ordered.
Will changing the unit fix a draught around the sash?
Not by itself. Draughts around an opener can involve hinges, weather seals or locking adjustments. Ask for those faults to be assessed separately from the sealed glass unit.
Find out what the work could cost
Describe the affected openings and include your postcode. Suitable sealed-unit specialists covering Epsom may contact you to discuss the work.